

MLCCs with gold terminations from SRT Microcéramique. 16 V – 1000 V · 0201–2225. Select the configuration using the ordering information and technical specifications.
Manufacturer
SRT Microcéramique
Design Types / Key Specifications
16 V – 1000 V
0201–2225
Ordering Information
The manufacturer part number depends on the selected configuration. Please refer to the following specifications and the ordering code in the datasheet. Permissible combinations of design, electrical ratings, and connections are series-dependent.
Original Overview of Design Types and Ordering Information

Electrical Parameters and Characteristics
Data provided at +25 °C unless stated otherwise. For specific values, please consult the data sheet for the selected version.
Operating temperature
-55 °C to +125 °C
Temperature coefficient
NP0: ± 30 ppm
N2T: 2200 ± 350 ppm/°C
X7R: ± 15% at 0 Vdc
ageing rate
X7R: 2% per decade
Np0/n2t
≤ 1·10⁻³ at 1 Vrms and 1 MHz for values ≤ 1000 pF
≤ 1·10⁻³ at 1 Vrms and 1 kHz for values > 1000 pF
X7R : ≤ 0.025 at 1 kHz
Insulation resistance (IR)
25 °C/Un 10⁵ MOhm or 1000 Ohm-Farads, whichever is lower
125 °C/Un 10⁴ MOhm or 100 Ohm-Farads, whichever is lower
dielectric strength
2.5 Un at U ≤ 200 V | U+250 V at 200 < U ≤ 500 | 1.5 U at 500 < U < 1000 | 1.2 U at U ≥ 1000
5 s at max. 50 mA charging current
Application and Design-In
Typical Applications
•
Microelectronics Applications
•
Wire bonding/Adhesive bonding
Technical Specifications at a Glance
•
Max. 0.2 µm flash gold for adhesive bonding (W-terminal) • Min. 2.5 µm thick gold for wire bonding/adhesive bonding (G-terminal)
Data sheets and technical consulting
Original SRT catalogue featuring product series, technical specifications, and ordering codes.
Open series data sheet ↗
Select model series jointly
Please provide your requirements, preferred design type, and required quantity. We will support you with technical selection, sampling, and your enquiry.

